Libec Camera Tripod System JAPAN Perfect Balance HS-150 Spreader 75mm Bowl Snap
- Product Code: HS-150
- Availability: In Stock
$1,423
Libec Camera Tripod System
JAPAN HS-150
Ground Spreader 75mm Bowl Aluminum
Dual Head - Snap ON/OFF Plate
Worlds first tripod system to perfectly balance a mirrorless camera.
HS-150 Tripod System with Dual Base Pan Tilt Fluid Head, 75mm Aluminum Tripod, Floor-level spreader, Carrying Case
H15D Head / RT30B Tripod / SP-2B Floor-level Spreader / RC-30 Case
About Libec HS Series System
Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.
Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.
Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.
Snap On/Off Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.
Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40 Degree C/-40 Degree F up to +60 Degree C/+140 Degree F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.
Dual Head
The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.
User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.
LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.
Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.
Head:
6.6lb/3kg payload for today’s Mirrorless Cameras, DSLR and Small Handheld Camcorders setups
Dual Base (75mm/flat base) Pan Tilt Fluid Head with 3/8” threads
Compatible with 75mm ball diameter & flat base tripods
Mountable on sliders, skater dollies, and other equipment
Step-free Ultimate Counterbalance System
Equipped with a counterbalance meter with the measurement range of 0 to 100
Sliding plate range of +/- 1.2" / +/-30mm
Variable Switch Torque System
Low-temperature characteristics
+90°/-70° Tilt Angle for a variety of tilt shots
Snap on/off sliding plate compatible with Sachtler and Manfrotto heads
User Friendly Accessory Port
LED bubble level for easy leveling
Dual side Pan Handle Rosettes
Extendable pan handle
Tripod:
75mm ball diameter
Maximum Height of 5.42ft/1.6m with head
2-stage (3-Sections)
Integrated metal spikes for field operations
Lightweight design ensures high stability and rigidity
Adjustable/removable Floor-level Spreader for low & high shots
Libec HS Series System Specifications
Payload
6.6 lbs (3kg)
Counterbalance range
1.7 to 4.4lbs (0.8 to 2kg) (C.G.55mm)
Counterbalance
Perfect Balance
Continuous Counterbalance with Illuminated Meter
Pan drag mode
Free plus 3 steps
Tilt drag mode
Free plus 3 steps
Drag system
Multilayered Metal Structure
Tilt angle
+90 Degree / -70 Degree
Temperature range
-40 Degree F to +140 Degree F (-40 Degree C to +60 Degree C)
Bubble level
Illuminated
Camera plate
Sliding plate compatible with Manfrotto and Sachtler heads
Sliding range
+/- 1.2" (30mm)
Long sliding plate
Optional
Plate attachment
1/4" screw with video pin
Accessory attachments
1/4" and 3/8" screw holes
Spare screw
1/4" and 3/8" screws
Head attachment
75mm bowl
Pipe material
Aluminum
Section
2-Stage
Height
31.9 to 65.4" (81 to 166cm)
Weight
13 lbs (5.9kg)
Tags: libec, camera, tripod, system, japan, perfect, balance, spreader, 75mm, bowl, snap, cameras, accessories, Libec, Camera, Tripod, System, JAPAN, Perfect, Balance, HS-150, Spreader, Bowl, Snap, Cameras, Accessories