D tap Battery Charger AC Adapter 16.8V Power P tap V mount V Lock charger Camera

16.8V 3A d-tap battery charger for camera camcorder V mount / V lock battery pack  adapter with dtap plug

Specifications:

-100% brand new and high quality Super strong protection.

-Input: 100-240VAC, 50 / 60Hz

-Output: 16.8V 3A

-Charge indicator: charging red light /full= green light

-Security protection: OVP / OCP / overload protection / short circuit protection

-Color: black

-Maximum power: 63 W

-US Plug, AU Plug Adapter included

-Compatible with the following model / part numbers: BP-U65 ... BP-U68 V battery V lock of PMW-EX330K PMW-EX330L ... PMW-580K PMW580L ... PDW-680 PDW-700 PDW- 850 ... PMW-TD300 ... HDW-F900R HDW-680 HDW-800P ... PMW-F55 PMW-F5 professional camcorder

-Compatible with the following model:

Canon PowerShot G7X Mark II from Canon PowerShot SX620 SA Canon PowerShot SX720 HS Sony BP-U65 ... BP-U68 Sony BP-95W Sony BP-150W Sony AN150W Sony HDW-800P ... Sony PDW-850 Sony DSR-250P Sony DSR-600P Sony DSR-650P Sony HDW-800P Sony PDW-850 Sony DSR-250P Sony DSR-600P Sony DSR-650P Sony HDCAM series digital cinema camera

Gold melting metal torch mini graphite crucible:

1 pcs 16.8V 3A charger

1-piece power cable

Charger use and maintenance:

1. When charging, it first connects to the battery, then connects to AC; After full charge, cut off AC and then pull the battery plug. If you pull the battery plug first while charging, especially when the charging current is large (red light), overtime it may damage the charger.

2. When the LED light turns green, it continues charging for 2-3 hours.

3. Do not let the battery get completely drained (no power), then charge it. Otherwise, the battery cannot be protected and may get damaged. use a USB or lower voltage to recharge first.

4 long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-illumination, which favors the activation of long-term stationary material in the deep part of the battery. Luminous means that handling the controller battery is a low voltage protection action.

5. Use the charger in a dry place on time.

6. When you do not use the charger, do not always connect the power supply.

7. Confirm your battery because it is used to charge the lithium battery. Do not use the charger on the LiFepo4 battery, otherwise the charger will heat incredibly.