DJI Focus Pro All In One Combo Camera Auto Focus Lidar Grip Hand Unit Motor Case
- Product Code: djiallinonefocuspro
- Availability: In Stock
$1,990
DJI Focus Pro All In One Combo
Camera Auto Focus
Lidar, Grip, Hand Unit, Motor & Case
Excellent as new condition, fully working
Includes all original items shown in photos and packaging etc.
It was purchased for a project, later cancelled.
tested all items working normal
20-Meter Subject Focusing, 76,800 Ranging Points
LiDAR human-subject focus distance is approx. 3 times that of the previous generation. The upgraded LiDAR boasts 76,800 ranging points, sharpening human-subject edge detection.
Built-in Camera, Enhanced AI Recognition Algorithms
More reliable recognition of human subjects and vehicles can be achieved. Even if the subject is momentarily obscured, the LiDAR can quickly regain focus.
AMF Mode, Human-Machine Collaborative Focus Control
In AMF mode, cinematographers can both visually observe the focus status on the monitor and intuitively perceive the autofocus logic through tactile feedback.
FIZ Lens Control, Magnetic Damping Tactile Feedback
The Focus Pro Hand Unit features real-time, stepless damping adjustment, and the Focus Pro Motor supports one-button linking with the Hand Unit. This allows focus pullers to effortlessly control lens FIZ.
LiDAR Waveform, Top-Down Focus Assistance View
Cinematographers can access the LiDAR Waveform focus assistance [3] through the High-Bright Remote Monitor. In addition, LiDAR Waveform offers supplementary information.
Compatibility With DJI PRO Ecosystem
DJI Focus Pro can work with Ronin stabilizers, DJI Transmission, Ronin 4D, Inspire 3, and more. This provides a robust AMF focusing solution for expanded scenarios.
Description
The DJI Focus Pro All-In-One Combo offers a comprehensive solution for achieving precise FIZ control over your manual camera lens. With the LiDAR unit, Focus Pro Motor, Focus Pro Grip, and hand unit, you have all the necessary tools at your disposal.
The LiDAR unit, specifically designed for the RS 3 Pro and RS 4 Pro gimbal stabilisers, enhances autofocus capabilities with its expanded ranging points, fast refresh rate, and wide detection area. It supports both wide-angle and telephoto lens configurations and features a built-in camera for accurate focus.
The Focus Pro Grip, equipped with a touchscreen display and various buttons, allows for intuitive control over camera and lens operations. It can be easily attached to your gimbal configuration using the built-in NATO clamp, and its battery lasts up to 2.5 hours.
The DJI Focus Pro Hand Unit, with its long-range control and tactile feedback for precise focusing, complements the Focus Pro Motor and gimbal stabiliser setup. It also offers Bluetooth recording control and a convenient touchscreen display for monitoring settings. Power for the hand unit is provided by an NP-F550 battery.
Specifications
DJI Focus Pro LiDAR
General
Compatibility DJI RS 3 Pro / RS 4 Pro / Focus Pro Grip
Resolution 1920 x 1440
Frame Rate 30 fps
Field of View 57.4° (Horizontal)
44.6° (Vertical)
Range 1.6 to 65.6' / 0.5 to 20 m
Inputs / Outputs
USB I/O 2 x USB-C Female Input
Power
Power Source USB
DC Input Power 6.6 to 17.2 VDC
Power Consumption 6.3 W (Typical)
6.8 W (Maximum)
Environmental
Environmental Protection No
Operating Temperature -4 to 113°F / -20 to 45°C
Physical
Mounting 1x Cold Shoe
1x 1/4"-20 Thread
Colour Black
Cable Length 11.8" / 30 cm
Dimensions 2.7 x 2.2 x 1" / 68 x 57 x 25 mm
Weight 4.9 oz / 140 g
DJI Focus Pro Grip
General
Compatibility DJI Focus Pro Motor / RS 4 Pro Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser
Display
Display Size 1.8"
Touchscreen Yes
Inputs / Outputs
USB I/O 4 x USB-C Female Input
Wireless
Wireless 2.4 GHz Radio/RF / Bluetooth
*Built-In
Power
Power Source Battery
Battery Type 1x Internal Rechargeable
DC Input Power 6.6 to 8.4 VDC
Environmental
Operating Temperature -4 to 113°F / -20 to 45°C
Physical
Mounting 1x NATO Clamp
2x NATO Rail
1x M4 Screw
1x 1/4"-20 Screw
Colour Black
Cable Length 15.7" / 40 cm
Dimensions 6.4 x 2.9 x 2.3" / 162 x 73 x 59 mm
Weight 17 oz / 482 g
DJI Focus Pro Motor
General
Compatibility DJI RS 3 Gimbal Stabiliser / RS 4 Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser / RS 4 Pro Gimbal Stabiliser / Focus Pro Grip / Focus Pro Hand Unit / Ronin 4D Flex
Max Transmission Distance 524.9' / 160 m
Gear Specs 30 Teeth, 0.8 MOD
Max Torque 0.6 Nm
Speed 300 rpm (Max)
Inputs / Outputs
USB I/O 1 x USB-C Female Input
Wireless
Wireless 2.4 GHz Radio/RF
*Built-In
Power
Power Source USB
DC Input Power 6.6 to 17.2 VDC
Environmental
Certifications COE, FCC
Operating Temperature -4 to 113°F / -20 to 45°C
Physical
Mounting 1x 15mm Rod
1x 1/4"-20 Screw
1x Rod Mount Kit
Cable Length 11.8" / 30 cm
Dimensions 3.9 x 2.4 x 1.3" / 100 x 61 x 34 mm
Weight 4.3 oz / 123 g
DJI Focus Pro Hand Unit
General
Compatibility DJI RS 4 Pro Gimbal Stabiliser / RS 3 Pro Gimbal Stabiliser
Max Transmission Distance 328.1 to 524.9' / 100 to 150 m
Display
Display Size 1.09"
Touchscreen Yes
Wireless
Wireless Bluetooth / 2.4 GHz Radio/RF
*Built-In
Power
Power Source Battery
Battery Type 1x Sony L-Series
DC Input Power 6.3 to 8.4 VDC
Power Consumption 0.83 W (Typical)
Environmental
Certifications COE, FCC
Operating Temperature -4 to 113°F / -20 to 45°C
Physical
Cable Length 19.7" / 50 cm
Dimensions 5 x 3.4 x 3.4" / 128 x 87 x 87 mm
Weight 19.6 oz / 555 g
Tags: focus, combo, camera, auto, lidar, grip, hand, unit, motor, case, accessories, used, gear, lens, adaptors, converters, Focus, Combo, Camera, Auto, Lidar, Grip, Hand, Unit, Motor, Case, Accessories, Used Gear, Lens adaptors and converters